Advertisement

Sign up for our daily newsletter

Advertisement

Komatsu pc 100 weight loss program: Overview of the PC228USLC-10 Short Tail Swing Excavator

Track width mm

William Murphy
Friday, November 22, 2019
Advertisement
  • Do not suddenly accelerate the engine before the warming-up operation is completed.

  • Width to outside of caterpillar track mm Height to cab upper part mm Clearance mm Counterweight ground clearance mm Rear platform swing radius mm Caterpillar track length on ground level mm. Counterweight ground clearance mm

  • NOTlCE The amount of reclining for the seat is greatest when the seaIt is moved forward, and becomes smaller as the seat is moved to th erear.

  • Low fuel consumption controlled by an electronic control system provides an environment-friendly machine. With permanent antifreeze, no change of coolant is required for a year.

Account Options

Height to cab upper part mm 8. Rear platform swing radius mm Maximum excavation depth mm.

Let us know if you have any catalog for exchange. SKYPE: epc. Working weight kg Fuel Capacity l. Contact us. Buy now. Hydraulic Shovel Komatsu PC Counterweight ground clearance mm.

Progrm word is used on safety messages and safety labels for hazards which could result in minor or moderate injury if the hazard is not avoided. When selecting the transportation route, take into consideration weight of the machine when loaded on the trailer. Machines Keep this manual handy and have all personnel read it periodically. These components deteriorate over time, and can cause fire because of oil leakage or failure in the work equipment system. NOTICE When using the boom or arm to raise the machine, always have the bottom of the bucket in contact with the ground. Run the engine at low speed when carrying out the lifting work.

Our managers proceed your order the same day. Clearance mm 7. Parts catalog is an electronic database that includes detailed parts list and accessories information for Komatsu equipment, intended for Japanese market. To purchase a catalog online, please add the product to your cart, fill in the contact form online. Height to cab upper part mm 8.

Path of hydraulic oil Komatsu pc 100 weight loss program both the left and right pedals, when the front of progrzm pedal is depressed, the oil flows to the piping for the left side of the work equipment; when the rear of the pedal is depressed, the oil flows to the piping for the right side of the work equipment. If it is necessary to run the engine at idling, apply a load from time to time or run the engine at a mid-range speed. Komatsu cannot predict every circumstance that might involve a potential hazard in operation and maintenance. If oil has been added to above the H mark, stop the engine and wait for the hydraulic oil to cool down, then drain the excess oil from the drain plug 8. These safety messages or labels usually describe precautions that must be taken to avoid the hazard.

Turn the key clockwise, align the match mark on the komastu with the rotor groove, then remove the cap. Carry out the check and adjustment under the same conditions as when operating on jobsites where the track becomes clogged with mud, measure with the track clogged with mud. It is thus necessary to continually inspect the track tension so as to maintain the standard tension. Avoid sudden changes of direction as far as possible.

The accumulator For the handling. Set the towing machine and the towing line when connecting it. The key will return automatically to the ON position. Inset-t lock pin 0 in the hole of the point and hit it until its top is the same level as the surface of point 0.

Maximum excavation depth mm Maximum radius along ground level mm Maximum cut height mm Maximum loading height mm Maximum vertical wall digging depth mm Unit load-transfer height mm Unit load-transfer length mm. Working weight kg Fuel Capacity l. Cylinders number 4. Construction Machinery. Counterweight ground clearance mm

Having too much oil or too little oil are both causes of problems. Periodic replacement. Komatsu is komateu not responsible for failures caused by incorrect fuel or by water, komatsu pc 100 weight loss program or other contaminants in the fuel. Be careful not to get oil, fuel, or chemical solvent on the road liner. Start and operate the machine only while seated. If there is any leakage from the piping or hoses, the piping, hoses, and the surrounding area will be wet, so check for cracks in the piping and hoses and for swelling in the hoses. In no event should you or others engage in prohibited uses or actions as described in this manual.

Our managers proceed your order the same day. Parts catalog includes original spare parts and accessories information for Komatsu construction equipment. Construction Machinery. Sizes 2.

Our managers proceed your order the same day. Quick Send E-Mail. Maximum radius along ground level mm Working weight kg Fuel Capacity l.

Standard tightening torques for bolts and nuts When carrying out this operation, always wear goggles, helmet, gloves, and other protective equipment. Note: Position 0: For attachments such as crushers and power rippers with large oil flow Position 0: For attachments such as slide arm with small oil flow. In the heavy-duty and general operation modes, the power max.

Electronic material contains safety komatsu pc 100 weight loss program, operation instructions, maintenance recommendations, wright, special instructions for repair, structure, and function, troubleshooting, assembly and disassembly, the chapter about the engine, electric and electronic system, many diagrams, screenshots, and schemes, and more. Hydraulic system overflow valve pressure Width to outside of caterpillar track mm 4. Unit load-transfer height mm Unit load-transfer length mm Maximum excavation depth mm Maximum radius along ground level mm Maximum cut height mm Maximum loading height mm Maximum vertical wall digging depth mm. Maximum excavation depth mm 1. Counterweight ground clearance mm

  • Carry out bucket and arm operation for 5 minutes at,full stroke, alternating between bucket operation and arm operation at 30 second intervals.

  • Maximum cut height mm

  • Do not suddenly accelerate operation is completed. When the knob is turned clockwise, the sound volume increases.

After loading foilows. If the voltage setting is wrong, it will cause the charger to overheat and catch fire, and this may lead to an explosion. Adjustable height: 65 mm 2. REMARK When the work equipment is installed, load the machine from the front; when the work equipment is not installed, load the machine from the rear. Warning tag: Attach the warning tag to the starting switch or other appropriate is not aware of the circumstances from starting the engine.

Maximum excavation depth mm 1. Have something to exchange? Height to cab upper part mm 8. Maximum loading height mm Bucket initial volume 0. Order the latest version with worldwide shipping or Download! Clearance mm 7.

Specifications

Komatsu Japan ALL Parts Catalog Parts catalog is an electronic database that includes detailed parts list and accessories information for Komatsu equipment, intended for Japanese market. Unit load-transfer height mm 9. Clearance mm 7. Hydraulic system overflow valve pressure This Komatsu product information comes in PDF format.

If the circuit is still under pressure, it will lead to serious injury or damage, so alwavs do as follows. Always lock the door securely. Set a block at the bottom face of the bucket so that it is possible to knock out the pin of tooth 11, then check that the work equipment is in a stable condition, and lock the safety lock lever. When doing this, operate the levers slowly.

To purchase a catalog online, please add the product to komatau cart, fill in the contact form online. It comes as the Microsoft setup files with a MB file size. Cylinders number 4. Have something to exchange? Unit load-transfer length mm 3. Parts catalog includes original spare parts and accessories information for Komatsu construction equipment.

Swing device

Shoe dimensions mm Specific ground pressure Unit load-transfer height mm 9. Maximum excavation depth mm 1.

Hydraulic system fluid volume l. Unit load-transfer length mm 3. It comes as the Microsoft setup files with a MB file size. Switch to mobile version.

ALSO READ: Weight Loss Scale Fluctuations

If the lever is moved inside the deceleration range, engine speed will suddenly rise. Komatsu pc 100 weight loss program the key at this position until the monitor Immediately after the pre-heating monitor goes off, The prlgram automatically returns to the OFF position. Adjustable wrist control levers make operations smooth and easy. Limitations: Les bris, autres que ceux resultant de defauts de materiaux ou de construction, ne sont pas couverts par cette Garantie. For levers 2, 3 and 4, the engine speed changes as follows because of the auto-deceleration mechanism. When working with others, misunderstandings between workers can lead to serious accidents.

Track width mm Rear platform swing radius mm Hydraulic system overflow valve pressure Order the latest version with worldwide shipping or Download! Construction Machinery. Maximum excavation depth mm Maximum radius along ground level mm Maximum cut height mm Maximum loading height mm Maximum vertical wall digging depth mm Unit load-transfer height mm Unit load-transfer length mm.

Let us know if you have any catalog for exchange. Track width mm Hydraulic system fluid volume l. Unit load-transfer height mm 9. Clearance mm 7. Switch to mobile version. Quick Send E-Mail.

Screenshots for Komatsu PC1000-1 & PC1000LC-1 & PC1000SE-1 Hydraulic Excavators Set of PDF Manuals:

Buy now. Our managers proceed your order the same day. Maximum excavation depth mm Maximum radius along ground level mm Maximum cut height mm Maximum loading height mm Maximum vertical wall digging depth mm Unit load-transfer height mm Unit load-transfer length mm. Contact us.

If any of the levers are operated, the engi. Remember that the soil after heavy rain, blasting, or wejght is weakened in these areas. Remove dirt and dust from around engine, battery radiator Check if there is any dirt or dust accumulated around the engine or radiator. Turn the tuning button manual, auto to adjust to the desired frequency.

ALSO READ: Manuel Uribe Weight Loss 2014

Keep a fairly long distance between the road shoulder and the machine. Troubleshooting Also, do not wear oily clothes, because they are flammable. Places to measure PC : Between 3rd and 4th track roller from sprocket PC, : 3rd track roller from sprocket. Turn the key clockwise, align the match mark on the cap with the rotor groove, then remove the cap. NEVER correct your steering again. Path of hydraulic oil For both the left and right pedals, when the front of the pedal is depressed, the oil flows to the piping for the left side of the work equipment; when the rear of the pedal is depressed, the oil flows to the piping for the right side of the work equipment.

Hydraulic system fluid volume l. Clearance mm 7. To purchase a catalog online, please aeight the product to your cart, fill in the contact form online. Komatsu Japan ALL Parts Catalog Parts catalog is an electronic database that includes detailed parts list and accessories information for Komatsu equipment, intended for Japanese market. Komatsu pdf manual instant preview file 1 Komatsu pdf manual instant preview file 2.

However, their weak weighg is lack of strength. When making counter-rotation turn spin turn pull the left travel lever When turning leti using counter-rotation, back and push the right travel lever forward. Be sure that all guards and covers are in their proper position. ON position Electric current flows in the charging and lamp circuits.

Unit load-transfer height mm Unit load-transfer length mm Maximum excavation aeight mm Maximum radius along ground level mm Maximum cut height mm Maximum loading height mm Maximum vertical wall digging depth mm. Width to outside of caterpillar track mm 4. Width to outside of caterpillar track mm Height to cab upper part mm Clearance mm Counterweight ground clearance mm Rear platform swing radius mm Caterpillar track length on ground level mm. Maximum cut height mm Unit load-transfer height mm 9.

After carrying out the warming-up operation, check that each looss and monitor lamp is in the following condition. Check the engine compartment for paper and debris. Improper operation and maintenance of this machine can be hazardous and could result in serious injury or death. Do not allow the cable ends to contact each other or the machine, to avoid hydrogen explosion.

Width to outside of caterpillar track mm 4. Our managers proceed your order the same day. Maximum radius along ground level mm Counterweight ground clearance mm. Let us know if you have any catalog for exchange.

Counterweight ground clearance mm. Order the latest version with worldwide shipping or Download! Unit load-transfer length mm 3. Komatsu Construction Europe Parts Catalog Parts catalog includes original spare parts and accessories information for Komatsu construction equipment. Switch to mobile version.

Dimensions

Earth laid on the ground and the soil near ditches losss loose. Stop the engine and remove. Always observe the following precautions. This word is used on safety messages and safety labels for hazards which could result in minor or moderate injury if the hazard is not avoided. ON lights up: ON goes out:.

Working weight kg Fuel Capacity l. Online text is designed to work on a personal computer or laptop. Maximum excavation depth mm 1. Maximum vertical wall digging depth mm

  • When keeping drum cans for a long period, put the drum on its side so that the filler port of the drum can is at the side.

  • Komatsu Japan ALL Parts Catalog Parts catalog is an electronic database that includes detailed parts list and accessories information for Komatsu equipment, intended for Japanese market.

  • Before starting the engine, look around the machine and under the machine to check for loose nut or bolts, or leakage of oil, fuel, or coolant, and check the condition of the work equipment and hydraulic system. For demolition or shear work, install a front guard on the windshield cab.

  • Hydraulic system fluid volume l.

Komatsu Construction Europe Parts Catalog Parts catalog includes original spare parts and accessories information for Komatsu construction equipment. Width to outside of caterpillar track mm 4. Maximum excavation depth mm 1. Hydraulic Shovel Komatsu PC Construction Machinery.

Komatsu Construction Europe Parts Catalog Parts catalog includes original ooss parts and accessories information for Komatsu construction equipment. Our company provides for sale original spare part catalogs, workshop manuals, diagnostic software for all models of engines, cars, trucks, buses, forklifts, tractors, harvesters, cranes, buldozers, generators, construction and agricultural machines, motorcycles. Hydraulic Shovel Komatsu PC Parts catalog includes original spare parts and accessories information for Komatsu construction equipment. Conditions of Use.

When checking the coolant, always check the radiator progeam tank when the engine is cold. If others start the engine, or touch or operate the work equipment control lever while performing service or maintenance, you could suffer serious injury or death. This warranty will be administered by Komatsu distribution in Canada.

All diagrams and illustrations in this tutorial will help to study in oomatsu all the technic in parts. Return and Refund Policy. Bucket initial volume 0. Parts catalog includes original spare parts and accessories information for Komatsu construction equipment. Unit load-transfer length mm 3. Quick Send E-Mail. Hydraulic system fluid volume l.

ALSO READ: Horse Gram Weight Loss Tips

Ditching work can be performed efficiently by attaching a bucket to match the width of the ditch and then setting the tracks parallel to the line of the ditch to be excavated. If there is weight loss program danger of falling or flying objects hitting the operator, to protect the operator as required for each particular situation. Do not allow anyone near the machine. ON position: Lights up The cab lamp can be turned on even when the starting switch is at the OFF position, so be careful not to leave it on by mistake. If any abnormality occurs, items which need to be repaired as soon as possible are displayed.

Improper operation komztsu maintenance of this machine can be hazardous and could result in serious injury or death. Stop the machine on a firm, fiat surface. Put a fence loss home the attachments, and set up No Entry signs to prevent unauthorized persons from coming close. Data such as operating hours, fuel consumption, location, cautions and maintenance alerts are relayed to the web application for analysis. NOTlCE Stop the engine, put the work equipment and machine in a stable position on the ground before carrying out the operation. Be careful not to touch the radiator or engine.

Contact us. Loss to mobile version. Construction Machinery. Quick Send E-Mail. Bucket initial volume 0. Unit load-transfer height mm Unit load-transfer length mm Maximum excavation depth mm Maximum radius along ground level mm Maximum cut height mm Maximum loading height mm Maximum vertical wall digging depth mm. Unit load-transfer height mm 9.

Never remove. If the level is below the L mark, remove the upper cover of the hydraulic tank weighf add oil through oil filler I. For demolition or shear work, install a front guard on the windshield cab. When the hydraulic oil is at a low temperature, do not carry out operations or move the levers suddenly.

Position is not used. Then fix the ramps proogram the centers of the trailer and the machine. To prevent pollution, particularly in places where people procedures given below. Komatsu delivers machines that comply with all applicable regulations and standards of the country to which it has been shipped. The following is an explanation of the devices needed for operating the machine.

ALSO READ: Alka Seltzer Cold Plus Weight Loss

Electronic material contains safety rules, loes instructions, maintenance recommendations, specifications, special instructions for repair, structure, and function, troubleshooting, assembly and disassembly, the chapter about the engine, electric and electronic system, many diagrams, screenshots, and schemes, and more. The scan tool is available with worldwide shipping. Shoe dimensions mm Specific ground pressure Parts catalog includes original spare parts and accessories information for Komatsu construction equipment. Komatsu Construction Europe Parts Catalog Parts catalog includes original spare parts and accessories information for Komatsu construction equipment.

In addition to the following, it is possible to further increase the range of applications by using various attachments. Fuel, oil, and antifreeze can be ignited by a flame. NOTICE Canceling automatic warming-up operation tf program becomes necessary in an emergency to lower the engine speed to low idling, cancel the automatic warming-up operation as follows. If you have only oil which is a different used in the machine, do not add it but replace all the oil. I Adjusting armrest angle Armrest can be made to spring up by hand to an angle of approx. Welding operations must always be carried out by a qualified welder and in a place equipped with a proper equipment. Using seat belt

Loosen the plug slowly to release the pressure. When opening 1. Avoid handling materials that will attach the adhesion of the steel core such as salt, ammonium sulphate, potassium chloride, potassium sulphate, calcium superphospate; or wash the machine after use.

Construction Machinery. Maximum excavation depth mm. Payment Conditions. Our managers proceed your order the same day. Maximum loading height mm Shoe dimensions mm. Width to outside of caterpillar track mm 4.

ALSO READ: Top Weight Loss Supplements For Women 2015 Short

Standard requirements for permanent antifreeze l SAE. If maintenance is carried out komatsu pc 100 weight loss program the inspection cover open and not locked in position, it may close suddenly if knocked or blown by the wind, and may cause injury to the operator. Check service meter: Check the service meter reading every day to see if the time has come for any necessary to be carried out. When cleaning the element, do not hit it or beat it against something. Select a person responsible for signaling. Do not open or close the door on ramps or on a platform.

Do not carry weiht work that involves concrete embankments. After the seat is set to the desired release the lever. When the engine is started, the power max. Earth laid on the ground and the soil near ditches is loose. This prevents sparks from generating near the battery which could ignite the hydrogen gas given off by the battery.

All diagrams and illustrations in this tutorial will help to study in detail all the technic in loss program. Maximum excavation depth mm Maximum radius along ground level mm Maximum cut height mm Maximum loading height mm Maximum vertical wall digging depth mm Unit load-transfer height mm Unit load-transfer length mm. Maximum loading height mm Hydraulic system fluid volume l. Unit load-transfer height mm Unit load-transfer length mm Maximum excavation depth mm Maximum radius along ground level mm Maximum cut height mm Maximum loading height mm Maximum vertical wall digging depth mm. Parts catalog is an electronic database that includes detailed parts list and accessories information for Komatsu equipment, intended for Japanese market. Working weight kg Fuel Capacity l.

While the engine is running, the operation display at the top inside of the meter will rotate pfogram show that the meter is advancing. Armrest angle adjustment When armrest is lifted, locking is applied When it is fully sprung up, locking is released. Sudden lever shifting during Hi-speed travel prohibited Never carry out sudden lever shifting as this may cause sudden starting. Operate right and left travel levers or right and left travel pedals as follows.

If the monitor lamp flashes, check the oil level in thk engine oil pan, and add oil. This will cause leakage of oil from the turbocharger oil supply piping. Loosen drain plug and drain the accumulated water until the float reaches the bottom. To prevent this, always leave a small safety margin when operating the cylinders.

Wear parts list When the special hook is installed, additional checks before starting and periodic checks, together with recording and storing of the periodic checks are required. Most accidents are caused by the failure to follow fundamental safety rules for the operation and maintenance of machines. If you accidentally touch the levers when they are not locked, the work equipment may suddenly move and cause serious injury or damage. Open the battery room door on the left side of the machine and check that the cooling water level is between the FULL and LOW marks on radiator reserve tank 0 shown in the diagram on the right.

Return and Refund Policy. Hydraulic system fluid volume l. Shoe dimensions mm Specific ground pressure Maximum excavation depth mm.

If water gets into the electrical system, there is danger that the machine may not 1100 or may move unexpectedly. Window washer fluid is sprayed out: When the switch leased, it returns to 0. Replace a fuse with another. If water lines, gas lines, and high-voltage electrical lines may be buried under the worksite, contact each utility and identify their locations.

Remove all such dirt or flammable material. Remove the filler cap slowly to allow pressure to be relieved. As far as possible, remove such obstacles or avoid traveling over them. Sudden lever shifting during Hi-speed travel prohibited Never carry out sudden lever shifting as this may cause sudden starting. Adjustment of reclining seat Pull lever up.

Avoid sudden lever shifting change such as sudden stopping from near top speed lever release operation. We reserve the right to make changes or add improvements at any time without incurring any obligation to install such changes on products sold previously. Be sure that sides are at the same level as one another.

If the machine has a fault, error information appears while the starting switch is ON. Seat belt and mounting clamps Check that there is no abnormality in the seat belt or mounting clamps. Turn the cap into place and insert the key into the key slot. Make sure that there is no mistake in the booster cable connections. When the safety lock lever is raised, take care not to touch the control lever. Adjustment of reclining seat Pull lever up. If the above inspections show any abnormality, carry out repairs immediately.

Hydraulic system fluid volume l. Width to outside of caterpillar track mm Height to cab upper part prograam Clearance mm Counterweight ground clearance mm Rear platform swing radius mm Caterpillar track length on ground level mm. If you have a catalog, that we do not have in our list, we would gladly discuss the details of exchange or purchase. Switch to mobile version.

  • If you sell the machine, be sure to give this manual to the new owners.

  • Height to cab upper part mm 8. Unit load-transfer height mm Unit load-transfer length mm Maximum excavation depth mm Maximum radius along ground level mm Maximum cut height mm Maximum loading height mm Maximum vertical wall digging depth mm.

  • Be careful not to get oil, fuel, or chemical solvent on the road liner. Even if the knob button continues to be pressed, the increase in power finishes after approx.

If the machine is used for a purpose that is not listed in this manual, Komatsu cannot bear any responsibility for safety. Do not operate the steering. Make the ground surface as hard and horizontal as proggram before carrying If the jobsite is dusty, spray water before starting operations. Even slight slopes may cause the machine to slip to the side, so travel at low speed and make sure that the machine is always traveling directly up or down the slope. If hard metal parts such as pins, edges, teeth, or bearings are hit with a hammer, there is danger that broken pieces might fly into your eyes and cause injury. The same applies when using the inverting bucket. When parking on public roads, provide fences and signs, such as flags or fights, on the machine to warn passersby to be careful.

If you leave your foot on the pedal and press it by mistake, the machine will move suddenly, and this may lead to a serious accident. For those who wish to use this service, please program your Komatsu distributor. Use your hand or a hammer to push rubber pin lock into the hole of the adapter. It is particularly dangerous if they get caught in the lever linkage. Be sure to break in the machine for the initial hours as indicated by the service meter. If the machine does get stuck in mud, use the following procedures to get the machine out. When knocking the pin, move the O-ring down to the regular groove.

These safety messages or labels usually describe precautions that must be taken to avoid the hazard. If electrolyte level is found low, add distilled water in the morning before beginning work. When using the machine as the power Operation and Maintenance Manual.

The scan tool is available with worldwide shipping. Hydraulic Shovel Komatsu PC To purchase a catalog online, please add the product to your cart, fill in the contact form online. SKYPE: epc. Order the latest version with worldwide shipping or Download!

  • Under normal conditions, do not open the radiator cap. If grasping the door handrail when mounting or dismounting or moving on the track, open and lock the door securely in the open position.

  • Rear platform swing radius mm Caterpillar track length on ground level mm 5.

  • Absolutely avoid using any water leak preventing agent irrespective of whether it is used independently or mixed with an antifreeze.

Unit load-transfer height mm Komatsu pc 100 weight loss program load-transfer length mm Maximum excavation depth mm Maximum radius loxs ground level mm Maximum cut height mm Maximum loading height mm Maximum vertical wall digging depth mm. Width to outside of caterpillar track mm Height to cab upper part mm Clearance mm Counterweight ground clearance mm Rear platform swing radius mm Caterpillar track length on ground level mm. Online text is designed to work on a personal computer or laptop. Our company provides for sale original spare part catalogs, workshop manuals, diagnostic software for all models of engines, cars, trucks, buses, forklifts, tractors, harvesters, cranes, buldozers, generators, construction and agricultural machines, motorcycles.

Return and Refund Policy. To purchase a catalog online, please add the product to your cart, fill in the contact form online. Clearance mm 7. Counterweight ground clearance mm Rear platform swing radius mm Quick Send E-Mail.

When general attachment is installed l When the pedal is depressed, the attachment is actuated. If the reserve tank becomes empty, first inspect for water leaks and then fill the radiator and the reserve tank with water. Wait for the temperature to go down, then carry out the inspection and maintenance in accordance with the procedures given in this manual.

Insert the key into the cap. Do not touch the relief valve. I Adjusting armrest angle Armrest can be made to spring up by hand to an angle of approx. All workers must maintain contact with the other workers. If any monitor lamp flashes, stop the engme or run It at low idling, and take the following action.

  • Services relating to the electric system are 1 check of fan blet tension, in the fan belt and 3 check of battery fluid level.

  • Komatsu Construction Europe Parts Catalog Parts catalog includes original spare parts and accessories information for Komatsu construction equipment. Counterweight ground clearance mm

  • This word is used on safety messages and safety labels where there is a high probability of serious injury or death if the hazard is not avoided. Clean the mounting face.

  • If it is unavoidably necessary to carry out the rustpreventive operation while the machine is indoors, open the doors and windows to improve ventilation and prevent gas poisoning. Fasten your seat belt securely.

Contact us. Komatsu pdf manual instant preview file 1 Komatsu pdf manual instant preview file 2. SKYPE: epc. Counterweight ground clearance mm Unit load-transfer height mm 9. Quick Send E-Mail. Working weight kg Fuel Capacity l.

Before starting the engine, or when and water from the fuel tank. Check that the mirrors and window glass provide a weight loss program view. Pdogram you are unsure about the safety of some procedures, contact Komatsu distributor. Alwavs follow the precautions below to prepare for action if anv iniurv or fire should occur. If the work equipment control lever is returned to the neutral position when the machine is stopped, even if the fuel control dial is set to FULL, the auto-deceleration mechanism will act to reduce!

Wait for the weather to clear so that visibility is sufficient to carry out work. Top up the fuel before this. Be particularly careful to ensure that the machine does not slip sideways.

If the button is pressed when komatsu pc 100 weight loss program frequency is displayed, display will give the present time for 5 seconds. Fuel strainer: If your machine Oil change: Check or weigbt. They could cause a fire. Position is not used. Swift slow-down speed down lights When the working mode is heavy-duty tion mode only, the speed is reduced operation mode and approx. If a heavy load is applied, the engine speed will drop - rpm to inform the operator that there is a heavy load, but the work equipment power will not drop.

Maximum vertical wall digging depth mm Counterweight ground clearance mm. Parts catalog is an electronic database that includes detailed parts list and accessories information for Komatsu equipment, intended for Japanese market. Sizes 2. If you have a catalog, that we do not have in our list, we would gladly discuss the details of exchange or purchase. Quick Send E-Mail.

This 4. There weight loss be some differences depending on the excavation depth, but try to use within the above range rather than going all the way to the extreme end of the cylinder stroke. Press again to turn the power off. Radiator water level monitor 0 Engine oil level monitor l Charge level monitor l Fuel level monitor 0 Engine water temperature monitor 0 l Engine oil pressure monitor 0 Engine water temperature gauge l l Fuel gauge I Engine pre-heating monitor l Air cleaner clogging monitor 0 Swing lock monitor l Replacement of engine oil monitor l.

Construction Machinery. Online text is designed to work on a personal computer or laptop. Hydraulic system overflow valve pressure Komatsu pdf manual instant preview file 1 Komatsu pdf manual instant preview file 2.

ALSO READ: Preventing Excess Skin During Weight Loss

Counterclockwise turning lowers the volume. Set the most effective mode according to the type of work using working mode progrm switch. Correct time settina When the time. When the switch is pressed komatsu pc 100 weight loss program, the power is turned off. If the battery charge ratio is low, the battery electrolyte may freeze. The properties of road liner change when working in extremely cold places, and this will reduce the life of the road liner. If this manual has been lost or has become dirty and can not be read, request a replacement manual from Komatsu or your Komatsu distributor.

  • Loosen drain plug and drain the accumulated water until the float reaches the bottom.

  • Order the latest version with worldwide shipping or Download!

  • At operating temperature, the coolant is under pressure.

  • Construction Machinery. It comes as the Microsoft setup files with a MB file size.

  • There is danger that the machine will turn under its own weight. When SET switch is pressed, the hour is rounded off for 0 to 14 minutes and rounded up for 45 to 59 minutes.

Outlines of service When the tracks on both sides are stuck in mud and the machine will not move, lay boards as explained above, and dig the bucket into the ground in front. To lock the cover 1. This is used to select the three travel speeds.

The range is divided into eight steps, each of which is continuously adjustable. These components deteriorate over time. When stopping the machine, select flat hard ground and avoid dangerous places. This may cause a fire.

Sidebar1?
Sidebar2?