Advertisement

Sign up for our daily newsletter

Advertisement

Hthp fluid loss test – HTHP Filtration - OFI Testing Equipment, Inc.

Ensure correct operation of valves.

William Murphy
Monday, November 13, 2017
Advertisement
  • Ensure correct operation of valves.

  • The test is used to determine the static filtration characteristics of the mud and the need for treatment with fluid loss additives under conditions of high temperature and high pressure.

  • The filter cake thickness is measured and must be maintained below 2 mm. Figure 2 — HTHP fluid loss test kit.

  • Learn how your comment data is processed.

Contact Us

Please keep in mind that this test is based on the surface condition, and it may be in error because it does not simulate downhole conditions. Ensure that test is performed at the correct temperature and that the temperature remains constant throughout the test. Mud filter cake thickness must be maintained below 2 mm. Explore the new Oilfield Glossary.

Even though it does not describe anything, it still gives you some ideas on how to do it. If drilling fluid has good fluid loss property, it will show a thin and impermeable mud cake. Fluid Loss Test Choose Area. Typically, the recommended temperature in the heating jacket should be above the estimated temperate of about 25 F to 50 F. The test is used to determine the static filtration characteristics of the mud and the need for treatment with fluid loss additives under conditions of high temperature and high pressure. Ryen Caenn,

ALSO READ: Armageddon Designator Tips To Lose Weight

Safety Note : Compressed gas is los in this test. Hthp fluid loss test Procedures and Manuals. Ensure correct operation of valves. Toggle Navigation. WhatsApp Online Chat! The HTHP fluid loss must be maintained within the programmed specification to limit potential for differential sticking and formation damage in the reservoir. One of Hottest for Hot sale!

Sodium lignin sul When the hthp fluid loss test hth done in accordance with API specification, the final test temperature and pressure shall be maintained to make the cement slurry pass through the filter screen mesh to produce water filtration loss. Provides a reliable means of determining the fluid loss characteristics of an Oil Well Cement. Manufacturer of Competitive Oil Drilling Fluids Overview Procedures and Manuals.

Choose Area

A fluid-loss test determines the relative effectiveness of a cement slurry to retain its water phase or to lose a portion of its water tesh as a filtrate to the formation. This can lead to differential sticking because of an increase in the contact area between formation and drill string. Total pressure in a cell should not exceed psi [4, kPa], and the differential pressure across the filter medium is specified as psi [3, kPa]. Home Technical Checklists Pre-spud 26 inch 16 inch

  • Conveniently located controls and indicators allow precise setting and control of temperature and pressure.

  • Pressure gauges and metal thermometers must be regularly maintained and calibrated. Home Technical Checklists Pre-spud 26 inch 16 inch

  • Facebook 0 Tweet 0 Pin 0 LinkedIn 0. Inquiry Form Shipping Information.

  • Andy Philips,

Bookmark the permalink. Filter By English. By DrillingFormulas. Sorry, you do not have access to this content Premium content requires special account permissions. View all posts by DrillingFormulas.

History Terms and Conditions of Sales. Home Technical Checklists Pre-spud 26 inch 16 inch Normal test hthp fluid loss test are o F and psi differential pressure. Ensure correct operation of valves. Provides a reliable means of determining the fluid loss characteristics of an Oil Well Cement. The slurry cup cylinder is made of stainless steel, and The filter cake thickness is measured and must be maintained below 2 mm.

Fluid Loss Test

Ensure that test is performed at the correct temperature and that the temperature remains constant throughout the test. This site uses Akismet to reduce spam. Click below to get started. The filter cake thickness is measured and must be maintained below 2 mm.

Inquiry Form Shipping Information. Home Technical Checklists Pre-spud 26 inch 16 inch gluid Ensure that test is performed at the correct temperature and that the temperature remains constant throughout the test. Calculation In order to compare with the low pressure test, which has a filter area twice the size of the HTHP filter press, the volume of filtrate must always be doubled. Conveniently located controls and indicators allow precise setting and control of temperature and pressure. Pressure gauges and metal thermometers must be regularly maintained and calibrated.

In order to compare with the low pressure test, which has a filter test twice the size of the HTHP filter press, the volume of filtrate must always be doubled. The filter cake thickness is measured and must be maintained below 2 mm. Ensure cell and measuring cylinder are dry before beginning the test. Synonyms: static filter press.

Sorry, you do not have access to this content

Toggle Navigation. Clean out any obstruction in the bore. Ensure correct operation of valves. Replace leaking gaskets and seals.

Tst Procedures test Manuals. Fluid Loss Test Choose Area. Total pressure in a cell should not exceed psi [4, kPa], and the differential pressure across the filter medium is specified as psi [3, kPa]. A fluid-loss test determines the relative effectiveness of a cement slurry to retain its water phase or to lose a portion of its water phase as a filtrate to the formation. The drilling fluid that has bad fluid loss will form a very soft and thick mud cake across permeable formations. Calculation In order to compare with the low pressure test, which has a filter area twice the size of the HTHP filter press, the volume of filtrate must always be doubled.

The test pressure is normally at psi differential pressure. Com April 10, - pm April 10, Drilling Fluids. Maximum allowable test temperature is o F with the standard equipment. Home Technical Checklists Pre-spud 26 inch 16 inch A thick mud cake across porous zones can be easily formed because the drilling mud has high fluid loss values.

Sign In to Access Premium Content

Inquiry Form Shipping Information. History Terms and Conditions of Sales. A fluid-loss test determines the relative effectiveness of a cement slurry to retain its water phase or to lose a portion of its water phase as a filtrate to the formation.

  • Calculation In order to compare with the low pressure test, which has a filter area twice the size of the HTHP filter press, the volume of filtrate must always be doubled.

  • Static Gel Strength Test Analyzer.

  • The API fluid loss testing equipment is shown below Figure 1.

  • Mud Filter Cake ».

  • The filter cake thickness is measured and must be maintained below 2 mm. Ensure cell and measuring cylinder are dry before beginning the test.

  • Conveniently located controls and indicators allow precise setting and control of temperature and pressure.

A thick mud cake across porous zones can be easily formed fluix the drilling mud has high fluid loss values. The API fluid loss testing equipment days shown below Figure 1. Mud filter cake thickness must be maintained below 2 mm. This test instrument determines the volume of fluid loss filtrate from a cement slurry water-based mud or fracturing fluid. Leave a Reply Cancel reply Your email address will not be published. The test pressure is normally at psi differential pressure.

ALSO READ: Will Running 4 Days A Week Help Me Lose Weight

Andy Philips, Insufficient fluid loss control can result in the cement slurry dehydrating and bridging off the annulus, preventing flud slurry from being pumped to its final location and leaving excess cement in the casing. The HTHP fluid loss must be maintained within the programmed specification to limit potential for differential sticking and formation damage in the reservoir. API Fluid Loss Test low-pressure, low-temperature filtration test is a test used to measure a filtration of mud with ambient temperature and psi differential pressure. Ensure cell and measuring cylinder are dry before beginning the test. Figure 2 — HTHP fluid loss test kit.

Click below to get started. Filter By English. Clean out any obstruction in the bore. If the drilling lfuid does not have good fluid loss property, fluid with small particles in the drilling mud can be invaded into formations and it will cause formation damage. Mud Filter Cake ». Synonyms: static filter press Antonyms: low-pressure, low-temperature filtration test Alternate Form: HPHT filtration test See: electrical stability testfiltercakefilter pressfilter-cake thicknessfiltrate volumefluid-loss controlfluid-loss-control materialgeothermal gradienthigh-pressure, high-temperaturejar testparticle-plugging apparatussintered. Bookmark the permalink.

About DrillingFormulas.Com

The Ttest test is used mainly with Oil Based Mud although it may be used with water based mud under certain circumstances such as in high temperature wells or wells which exhibit a high risk of differential sticking. Insufficient fluid loss control can result in the cement slurry dehydrating and bridging off the annulus, preventing the slurry from being pumped to its final location and leaving excess cement in the casing. Normal test conditions are o F and psi differential pressure. Safety Note : Compressed gas is used in this test.

The HTHP fluid loss test is similar to the API test because it indicates information on drilling mud filtration into the formation under a static condition over a certain period of time. Tset API fluid loss testing equipment is shown below Figure 1. Contact Us. Figure 2 — HTHP fluid loss test kit. Please keep in mind that this test is based on the surface condition, and it may be in error because it does not simulate downhole conditions. Antonyms: low-pressure, low-temperature filtration test. Even though it does not describe anything, it still gives you some ideas on how to do it.

A test to hthp fluid loss test static filtration behavior of water mud or oil mud at elevated temperature, up to about degF [ degC], maximum degF [ degC] if a special cell is usedusually according to the specifications of API. Typically, the recommended temperature in the heating jacket should be above the estimated temperate of about 25 F to 50 F. The HTHP fluid loss test is similar to the API test because it indicates information on drilling mud filtration into the formation under a static condition over a certain period of time. The best way to test the fluid loss is to simulate wellbore condition at high pressure high temperature in order to see what the fluid loss property will be. Filter By English. Normal test conditions are F and psi differential pressure and the maximum allowable test temperature is F with the standard equipment.

High Temperature / High Pressure Test (HTHP) - Mud Testing

Caution must be exercised when disassembling the cell after testing. Filtrate collected during HTHP testing must not be used for subsequent chemical analysis. Ensure correct operation of valves.

Product Detail Tset Tags. Pressure gauges and metal thermometers must be regularly maintained and calibrated. Toggle Navigation. The HTHP test is used mainly with Oil Based Mud although it may be used with water based mud under certain circumstances such as in high temperature wells or wells which exhibit a high risk of differential sticking. Safety Note : Compressed gas is used in this test. Calculation In order to compare with the low pressure test, which has a filter area twice the size of the HTHP filter press, the volume of filtrate must always be doubled. In order to compare with the low pressure test, which has a filter area twice the size of the HTHP filter press, the volume of filtrate must always be doubled.

ALSO READ: Do Body Wraps Work To Lose Weight

Replace leaking gaskets and seals. Pressure gauges and metal thermometers must be regularly maintained and calibrated. Ensure that test is performed at the correct temperature and that the temperature remains constant throughout the test. Overview Procedures and Manuals. WhatsApp Online Chat! Product Detail Product Tags. Contact Us.

The best way to test the fluid loss is to simulate wellbore condition at high pressure high temperature in order to see what the lozs loss property will be. Conveniently located controls and indicators allow precise setting and control of temperature and pressure. A test to measure static filtration behavior of water mud or oil mud at elevated temperature, up to about degF [ degC], maximum degF [ degC] if a special cell is usedusually according to the specifications of API. Calculation In order to compare with the low pressure test, which has a filter area twice the size of the HTHP filter press, the volume of filtrate must always be doubled. Explore the new Oilfield Glossary. Typically, the recommended temperature in the heating jacket should be above the estimated temperate of about 25 F to 50 F.

Maximum flid test temperature is o F with the standard equipment. Fluid Loss Test Choose Area. The HTHP test is used mainly with Oil Based Mud although it may be used with water based mud under certain circumstances such as in high temperature wells or wells which exhibit a high risk of differential sticking. Toggle Navigation.

Fluid Loss Test

We need a little more information from you before we can grant you access. Normal test conditions are o F and psi differential pressure. Home Technical Checklists Pre-spud 26 inch 16 inch

The test pressure is normally hthp fluid loss test flui differential pressure. The thicker the mud cake is, the more torque and drag are experienced while performing the drilling and tripping operations. Premium content requires special account permissions. See: electrical stability testfiltercakefilter pressfilter-cake thicknessfiltrate volumefluid-loss controlfluid-loss-control materialgeothermal gradienthigh-pressure, high-temperaturejar testparticle-plugging apparatussintered. Figure 2 — HTHP fluid loss test kit. Post Views: 9,

In order to compare with the low pressure test, which has a filter area twice the size of the HTHP filter press, the volume of filtrate must always be doubled. Replace leaking gaskets and seals. TGB consists of loss test body, heating vessel assembly, high accurate thermocouple, slurry cup of high-strength alloy and components such as temperature controller and high pressure manifold. Filtrate collected during HTHP testing must not be used for subsequent chemical analysis. Home Technical Checklists Pre-spud 26 inch 16 inch Normal test conditions are o F and psi differential pressure. Insufficient fluid loss control can result in the cement slurry dehydrating and bridging off the annulus, preventing the slurry from being pumped to its final location and leaving excess cement in the casing.

Choose Area

Because these cells are half the size of the ambient filtration area, HPHT filtrate volumes after 30 minutes are doubled. The HTHP fluid loss test is similar to the API test because it indicates information on drilling mud filtration into the formation under a static condition over a certain period of time. The drilling fluid that has bad fluid loss will form a very soft and thick mud cake across permeable formations. Total pressure in a cell should not exceed psi [4, kPa], and the differential pressure across the filter medium is specified as psi [3, kPa]. Even though it does not describe anything, it still gives you some ideas on how to do it.

For the HTHP fluid test, both temperature and pressure can be varied to represent an expected downhole condition. Normal test conditions are F and psi differential pressure and the maximum allowable test temperature is F with the standard equipment. A fluid-loss test determines the relative effectiveness of a cement slurry to retain its water phase or to lose a portion of its water phase as a filtrate to the formation. Safety Note : Compressed gas is used in this test. Your email address will not be published.

ALSO READ: Lose Weight In Two Weeks Yahoo Finance

Ryen Caenn, Fluid Loss Test A fluid-loss test determines the relative effectiveness of a cement slurry to retain its water phase or to lose a portion of its water phase as a filtrate to the formation. Antonyms: low-pressure, low-temperature filtration test. We need a little more information from you before we can grant you access. For the HTHP fluid test, both temperature and pressure can be varied to represent an expected downhole condition. History Terms and Conditions of Sales. Total pressure in a cell should not exceed psi [4, kPa], and the differential pressure across the filter medium is specified as psi [3, kPa].

When the test is done in accordance with API specification, the final test temperature and pressure shall be maintained to make the cement slurry pass through the filter screen mesh to produce water filtration loss. A fluid-loss test determines the relative effectiveness of a cement slurry to retain its water phase or to lose a portion of its water phase as a filtrate to the formation. Ensure correct operation of valves. Pressure gauges and metal thermometers must be regularly maintained and calibrated.

Don't have an account? The HTHP testing equipment has a test jacket so you can heat up the drilling fluid sample to the expected wellbore temperature. Even though it does not describe anything, it still gives you some ideas on how to do it. Andy Philips, Com Working in the oil field and loving to share knowledge.

Hthp fluid loss test email address will not be published. A thick mud cake across porous zones can be easily formed because the drilling mud has high fluid loss values. Clean out any obstruction in the bore. The thicker the mud cake is, the more torque and drag are experienced while performing the drilling and tripping operations.

  • Because these cells are half the test of the ambient filtration area, HPHT filtrate volumes after 30 minutes fluix doubled. Fluid Loss Test A fluid-loss test determines the relative effectiveness of a cement slurry to retain its water phase or to lose a portion of its water phase as a filtrate to the formation.

  • The filter cake thickness is measured and must be maintained below 2 mm.

  • The drilling fluid that has bad fluid loss will form a very soft and thick mud cake across permeable formations.

Don't flujd an account? Contact Us. See: electrical stability testfiltercakefilter pressfilter-cake thicknessfiltrate volumefluid-loss controlfluid-loss-control materialgeothermal gradienthigh-pressure, high-temperaturejar testparticle-plugging apparatussintered. Com April 10, - pm April 10, Drilling Fluids. Andy Philips, Provides a reliable means of determining the fluid loss characteristics of an Oil Well Cement.

The API fluid loss testing equipment is shown below Figure 1. Pressure gauges and metal thermometers must be regularly maintained and calibrated. Ensure that test is performed at the correct temperature and that the temperature remains constant throughout the test. Don't have an account? The API fluid loss test can lead you to the wrong conclusion, because at the surface condition the test demonstrates very good fluid loss and a very thin filter cake. Figure 2 — HTHP fluid loss test kit.

This test instrument determines test volume of fluid loss filtrate from a cement slurry water-based mud or fracturing fluid. This can lead to differential sticking because of an increase in the contact area between formation and drill string. Fluid Loss Test A fluid-loss test determines the relative effectiveness of a cement slurry to retain its water phase or to lose a portion of its water phase as a filtrate to the formation.

Contact Us. One of Hottest for Hot sale! Caution must be exercised when disassembling the cell after testing. The slurry cup cylinder is made of stainless steel, and

Synonyms: static filter press. Figure 2 — HTHP fluid loss test kit. The drilling fluid that has bad fluid loss will form a very soft and thick mud cake across permeable formations. Home Technical Checklists Pre-spud 26 inch 16 inch

Related Products

Andy Philips, API Fluid Loss test Test low-pressure, low-temperature filtration test is a test used to measure a filtration of mud with ambient temperature and psi differential pressure. A test to measure static filtration behavior of water mud or oil mud at elevated temperature, up to about degF [ degC], maximum degF [ degC] if a special cell is usedusually according to the specifications of API.

Sodium lignin sul Overview Hthp fluid and Manuals. Provides a reliable means of determining the fluid loss characteristics of an Oil Well Cement. Filter By English. Insufficient fluid loss control can result in the cement slurry dehydrating and bridging off the annulus, preventing the slurry from being pumped to its final location and leaving excess cement in the casing. The HTHP test is used mainly with Oil Based Mud although it may be used with water based mud under certain circumstances such as in high temperature wells or wells which exhibit a high risk of differential sticking. Calculation In order to compare with the low pressure test, which has a filter area twice the size of the HTHP filter press, the volume of filtrate must always be doubled.

Then put the cement slurry in the preheated cylinder. The filter cake thickness is measured and must hrhp maintained below 2 mm. Fluid Loss Test Choose Area. In order to compare with the low pressure test, which has a filter area twice the size of the HTHP filter press, the volume of filtrate must always be doubled. Normal test conditions are o F and psi differential pressure.

  • This site uses Akismet to reduce spam. Insufficient fluid loss control can result in the cement slurry dehydrating and bridging off the annulus, preventing the slurry from being pumped to its final location and leaving excess cement in the casing.

  • Fluid Loss Test Choose Area.

  • Explore the new Oilfield Glossary.

  • Inquiry Form Shipping Information.

TGB consists of main body, heating vessel assembly, high accurate thermocouple, slurry cup of high-strength alloy and components such as temperature controller and high pressure manifold. Ensure correct operation of valves. Inquiry Form Shipping Information. Then put the cement slurry in the preheated cylinder.

WhatsApp Online Chat! In order to compare with the low pressure test, which has a filter area twice the size of hthp fluid loss test HTHP filter press, the volume of filtrate must always be doubled. Vluid the test is done in accordance with API specification, the final test temperature and pressure shall be maintained to make the cement slurry pass through the filter screen mesh to produce water filtration loss. The heating jacket in the cylinder is controlled by adjustable temperature controller and the high pressure manifold is equipped with the pressurized nitrogen, or other source that maintains a constant pressure to provide pressure to the slurry cup. The HTHP test is used mainly with Oil Based Mud although it may be used with water based mud under certain circumstances such as in high temperature wells or wells which exhibit a high risk of differential sticking.

Hthp fluid loss test In order to compare with the low pressure test, which has a filter area twice the size of the HTHP filter press, the volume of filtrate must always be doubled. Overview Procedures and Manuals. Conveniently located controls and indicators allow precise setting and control of temperature and pressure. API Fluid Loss Test low-pressure, low-temperature filtration test is a test used to measure a filtration of mud with ambient temperature and psi differential pressure.

Hthp fluid loss test Terms and Conditions of Sales. Filtrate collected during HTHP testing must not be used for subsequent chemical analysis. Clean out any obstruction in the bore. Provides a reliable means of determining the fluid loss characteristics of an Oil Well Cement. In order to compare with the low pressure test, which has a filter area twice the size of the HTHP filter press, the volume of filtrate must always be doubled. Ensure correct operation of valves.

When the cement slurry is completely dehydratedthe value of loss should be measured and recorded. Send email to us Download as PDF. Manufacturer of Competitive Oil Drilling Fluids Physical Dimensions: Dimensions w x d x h : 15 cm x 20 cm x 43 cm.

High Temperature / High Pressure Test (HTHP) - Mud Testing

Premium content requires special account permissions. Insufficient fluid loss control can result in the cement slurry dehydrating and bridging off the annulus, preventing the slurry from being pumped to its final location and leaving excess cement in the casing. Ensure correct operation of valves.

See: electrical stability testfiltercakefilter pressfilter-cake thicknessfiltrate hthp fluid loss testfluid-loss controlfluid-loss-control materialgeothermal gradienthigh-pressure, high-temperaturejar testparticle-plugging apparatussintered. API Fluid Loss Test low-pressure, low-temperature filtration test is a test used to measure a filtration of mud with ambient temperature and psi differential pressure. Because these cells are half the size of the ambient filtration area, HPHT filtrate volumes after 30 minutes are doubled. Antonyms: low-pressure, low-temperature filtration test. About DrillingFormulas. The HTHP fluid loss test is similar to the API test because it indicates information on drilling mud filtration into the formation under a static condition over a certain period of time. Insufficient fluid loss control can result in the cement slurry dehydrating and bridging off the annulus, preventing the slurry from being pumped to its final location and leaving excess cement in the casing.

Ensure cell and measuring cylinder are text before beginning the test. Caution must be exercised when disassembling the cell after testing. Ensure correct operation of valves. Send email to us Download as PDF. History Terms and Conditions of Sales. The test is used to determine the static filtration characteristics of the mud and the need for treatment with fluid loss additives under conditions of high temperature and high pressure. Safety Note : Compressed gas is used in this test.

Conveniently located controls and indicators allow precise setting and control of temperature and pressure. The test hthp fluid used to determine the static filtration characteristics of the mud and the need for treatment with fluid loss additives under conditions of high temperature and high pressure. When the test is done in accordance with API specification, the final test temperature and pressure shall be maintained to make the cement slurry pass through the filter screen mesh to produce water filtration loss. The heating jacket in the cylinder is controlled by adjustable temperature controller and the high pressure manifold is equipped with the pressurized nitrogen, or other source that maintains a constant pressure to provide pressure to the slurry cup.

  • Clean out any obstruction in the bore. Ensure correct operation of valves.

  • The HTHP test is used mainly with Oil Based Mud although it may be used with water based mud under certain circumstances such as in high temperature wells or wells which exhibit a high risk of differential sticking.

  • Com April 10, - pm April 10, Drilling Fluids.

  • Inquiry Form Shipping Information. This can lead to differential sticking because of an increase in the contact area between formation and drill string.

  • Fluid Loss Test Choose Area. Static Gel Strength Test Analyzer.

In order to compare with the low pressure test, which has a filter area twice the size of the HTHP filter press, the volume of filtrate must always be doubled. When the test is done in accordance with API specification, the final test temperature and pressure shall be maintained to make the cement slurry pass through the filter screen mesh to produce water filtration loss. Manufacturer of Competitive Oil Drilling Fluids Ensure cell and measuring cylinder are dry before beginning the test. Sodium lignin sul Clean out any obstruction in the bore.

Loss test drilling fluid that has bad fluid loss will form a very soft and thick mud cake across permeable formations. Inquiry Form Shipping Information. Mud Filter Cake ». Clean out any obstruction in the bore. See: electrical stability testfiltercakefilter pressfilter-cake thicknessfiltrate volumefluid-loss controlfluid-loss-control materialgeothermal gradienthigh-pressure, high-temperaturejar testparticle-plugging apparatussintered.

Your email address loss test not be published. The HTHP testing equipment has a heating jacket so you can heat up the drilling fluid sample to the expected wellbore temperature. Please keep in mind that this test is based on the surface condition, and it may be in error because it does not simulate downhole conditions.

When the test is done in accordance with API specification, the final test temperature and pressure shall be maintained to make the cement slurry pass through the filter screen mesh to produce water filtration loss. Then put the htup slurry in the preheated cylinder. The slurry cup cylinder is made of stainless steel, and When the cement slurry is completely dehydratedthe value of loss should be measured and recorded. Overview Procedures and Manuals. The HTHP test is used mainly with Oil Based Mud although it may be used with water based mud under certain circumstances such as in high temperature wells or wells which exhibit a high risk of differential sticking. Fluid Loss Test A fluid-loss test determines the relative effectiveness of a cement slurry to retain its water phase or to lose a portion of its water phase as a filtrate to the formation.

Conveniently located controls and indicators allow hthp fluid loss test setting and control of temperature and pressure. Fluid Loss Test A fluid-loss test determines the relative effectiveness of a cement slurry to retain its water phase or to lose a portion of its water phase as a filtrate to the formation. Ensure correct operation of valves. Caution must be exercised when disassembling the cell after testing.

Calculation In order to compare test the low pressure test, which has fuid filter area twice the size of the HTHP filter press, the volume of filtrate must always be doubled. Share This. The HTHP testing equipment has a heating jacket so you can heat up the drilling fluid sample to the expected wellbore temperature. This will directly affect the production rate of the well once it starts producing.

Read more about:

Sidebar1?
Sidebar2?